Helping Folks Since 1975
& 11 Years on the Web!
 |
| 
Pump Saver Plus - Lubrication & Corrosion Protection
Lubrication & Corrosion Protection
One quart
For Piston and Diaphragm pumps.
Protects from: - Corrosion
- Premature wear
- Sticking seats
This is a CONCENTRATE. You mix 4 to 8 oz per gallon. At 4 oz per gallon it would yield a total of 8 gallons.
Directions From SprayTech:
Circulate mixture completely through the pump, hoses, and gun - leaving the mixture in the system by keeping the hose and gun connected to the pump.
Gleem's Input If you don't want to buy this product, we also highly recommend a mixture of paint thinner and light weight oil. Don't have light weight oil? Make some. Ratio: 4 oz motor oil (SAE30 or 10w30) per 1/2 gallon of paint thinner (paint thinner is also labeled as mineral spirits).
Note: If you are going to run either mixture through the pump only (meaning not the gun and hose), you may not need to mix a whole gallon. A 1/2 gallon mixture should be enough fluid.
|
|
