** est. 1975 **
Airless Hose 50ft, 3/8" I.D., 3300 PSI (For Large Pumps)
Supplied with 3/8” Female Ends.
Please Note: This is 3/8" I.D. hose, which is not for what you normally want for 90% of applications. 3/8" is only used on Large pumps, and especially large pumps that are spraying block filler and elastomerics.
The SprayTech EP2510, EPX2455, EPX2505, EPX2555 are examples of pumps big enough to benefit from this larger ID hose or basically any airless pump with a .028" max tip or over. (On the Ep2510, SprayTech actually recommends you use 3/8" hose on at least the first 25ft of hose.)
You will need a 0088161 3/8" Male To 1/4" Female adapter to connect this 3/8" hose to your airless gun or whip; or a 0088162 3/8" Male To 1/4" Male adapter to connect this 3/8" hose to a 1/4" Hose. Also, if your pump is not yet ported for 3/8" (on the pump itself) you can either use another 0088161 adapter, or better yet port it with a 0088160 3/8" Male X 3/8" Male fitting.