** est. 1975 **
Wagner 9190 (2006 -Non Pusher Model) Paint Sprayer
This sprayer is SOLD OUT.
Please see our full line of Airless Paint Sprayers In Stock.
Twin Stroke Piston Pump, pumps material on both the up and down stroke for a powerful and smooth operation.
2006 Model (Non Pusher Valve)
With 1 year parts & labor Wagner Warranty available at over 500 service centers.
- 7/8 HP DC motor [runs off 15 amp household current}
- Piston Pump
- GX-08 Contractor grade metal spray Gun w/inline gun filter. This is a very good gun and comes with 7/8" threads.
- Inline Gun Filter
- Cart model with Super Sized Tires and removable handle for storage and transport
- Draws paint from a one and 5 gallon can
- Cart has a Lip that will Lift up a 5 gall pail
- 50' of hose (Max hose length 150')
- .42 GPM
- 517 reversible tip
- .021" MAX tip
- 3000 PSI
- Sells New for $529-$659.00
From the Manufacturer
High performance airless spray system for residential and light commercial applications. Powerful DC motor coupled with Wagner's Double Stroke Piston provides the performance required for a wide variety of applications. The 9190 features a rugged cart with super-sized tires for big-job mobility with removable handle for convenient transport and storage. The cart also has a 5-gallon pail bracket for easy moving of sprayer and paint.
Gleem's comments: The 9190 is highly recommended by Gleem. They have a good pump design and output; and a strong feature is it comes with the quality GX08 gun. ( Basically the same gun as the very popular top line G10 gun except it does not come with a swivel. ) The 9190 is among the pumps that we would recommend for someone who has a bigger painting project, like painting an entire house, especially a new house, with a lot of sheetrock. This is where your bigger pumps will stand out and show their strength.
The 9190 would also be a good pump for a part time painter. We have some local painters that have the 1900/9190 models ( 9190 is the same as the 1900 ) and they have been happy with them. The only complaint we have gotten from these painters is the suction set top threads are plastic vs. being metal; which in time can start to strip out if you are not careful when threading the suction set onto the pump. So since we know this pump maybe be used more often than the smaller rigs, (and possible may have a helper using it that is not as careful as the owner of the pump would be) we are offering a nice metal suction set (non-corrosive) as a $20.00 upgrade accessory. (Normally a $44.90 part).
(note: The picture of the unit at the top of the page shows the plastic intake, the suction set picture to the left is the upgrade metal one.)
To find out the exact shipping cost on this item, use our shopping cart. It will calculate the shipping before you have to enter credit card info. To give you a estimate, it runs about $30.00 to ship this unit to California, and around $19.00 to ship to Lower States like Florida and Georgia.
Shipping weight is 45 pounds.
We only have a very limited supply of these 9190 2006 models available, order now to avoid disappointment!
Our shopping cart inventory is in real time and will alert you if we are sold out when you add one to your shopping cart.